Uvex Sports | Size Guides | Houghton Country
Uvex is a German Company which specialises in sports safetywear for equestrian, cycling and skiing including helmets, gloves and eyewear.
Here at Houghton Country, we stock a number of styles of Uvex riding helmets.
Riding Hats
Lightweight and highly ventilated Uvex equestrian helmets are popular for leisure riding as well as dressage and show jumping competitions. They have a fixed peak design so are not suitable for cross-country riding.
How to measure your head for a riding helmet
Using a soft flexible measuring tape, wrap it around the widest part of your head. The head circumference is measured a finger width above the eyebrows.
It is helpful to do this with the hairstyle you are most likely to ride with.
Take the measurement several times in centimetres to ensure a more accurate measurement.
Unlike many traditional designs, Uvex Riding Helmets have an adjustable circumference with an IAS 3D dial system at the back.
They have four shell sizes - XXXS-S (junior); XXS-S; S-M; L-XL and cater for riders with a head size between 49 - 61cm.
Some of the sizes do cross between shell sizes, it is a matter of trying both and finding which feels best when on the head. The helmet should have a secure fit even with the chin strap open.
Uvex IAS allows helmets can be adjustable in width.
Dial Adjustment System
When trying a Uvex Hat the dial should be loosened, the hat put on then tightened.
The dial in the back of Uvex hats is used to tighten a ring within the hat to tighten and loosen the hat. Each dial has a maximum it can be tightened, if the dial reaches this point and the hat is still too big then a smaller-sized shell is required. If the dial is loosened as far as it can go and the hat is still too tight then a larger size may be required.
The uvex IAS 3D system should contact the head where there is a natural curve at the back of the head.
Height Adjustment
Uvex IAS 3D offers an added feature of precise adjustment to the head height.
The height of the hat can be adjusted in some styles to ensure a correct fit. There is an adjustable ratchet closure on the sides.
The helmet should be positioned horizontally on your head. The helmet should not sit too far back, otherwise, the forehead will not be protected, conversely, the hat should not be too far down over the forehead as this can affect sight.
Y-Divider
The length of the chin strap can also be adjusted to ensure a correct fit.
Monomatic comfort closure
The uvex monomatic comfort closure must be fully inserted until the final click. Two fingers should fit between the chin and strap.
How to care for your Uvex Riding Hat
When not in use your helmet should be safely stored in cool and dry conditions protected from daylight with no contact with chemicals and not exposed to pressure or stress. When transporting it is recommended that a protective layer such as a hat bag is used.
How to clean your Uvex Riding Hat
Outer Shell
Use a soft clothes brush or a damp lint-free cloth (fuzz-free) cloth to wipe the outer shell. For more stubborn dirt a damp cloth with a mild soapy solution and lukewarm water can be used.
Do not use a hard brush as the bristles can damage the finish of the hat.
Use mild soap only, strong chemicals can damage the finish of the hat.
Inner Fittings
All inner fittings carry a washing instruction label, and replacement parts are available in case they get damaged.
The hat liner is removable and is machine washable 30°C.
Do not tumble dry, air dry only.
The straps of the helmet can be cleaned with a lint-free (fuzz-free) damp cloth.
Warnings; The helmet can be damaged by contact with hydrocarbons, cleaning fluids, paints, decals or external influences.
Riding Hat Safety Standard
Uvex Riding Hats are certified to
EN 1384:2012-02 CE
VG1 01.040 2014-12
Uvex hats also carry a GS Mark.
The GS mark is a seal of approval for "Geprüfte Sicherheit" (Tested Safety) and it is regulated by German law (German Product Safety Act). This test mark is recognized worldwide. It means that the product has been subjected to a voluntary product and safety test conducted by an officially recognized test centre.
