Free UK Standard Delivery
On all orders over £74
Charles Owen
MS1 Pro Round Skull
How to fit a dial-fit helmet
Step 1: Measure up • Hair should ideally be worn in a low ponytail (if applicable).
• Using a soft fabric measuring tape, wrap it around the widest part of the head (just under the occipital ridge).
• It should follow a line just above the ear and about 1cm above the eyebrows to determine shell size.
Top Tip: Shells are universal fits (round and oval). If at the bigger end of the shell size for a round fit, choose a bigger shell for comfort.
Step 2: Fitting process
• Place helmet on head and hold roughly 1cm above the eyebrow, at its loosest setting.
• Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure.
Top Tip: Please tighten your dial-fit carefully. Over tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
• Check the fit by gently pulling down on the peak or front of the helmet. The forehead skin should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is indication the helmet is too big or the dial is not fastened tight enough.
• Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), a consistent contact around the perimeter of the helmet is not necessary.
Top Tip: Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing, and ensures you are securing correctly with every wear.
Step 3: Final steps
• The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
• There should be one fingers width between the chin and the chin strap. The gap between the chin and the chin strap is an indication of how far the hat could move in an accident.
Top Tip: When doing the chin strap up, place your finger between the strap and face to ensure you don’t pinch.
SIZE | SIZING | |
SMALL | 52 - 55 | |
MEDIUM | 55 - 58 | |
LARGE | 58 - 61 | |
SIZE | SKULL HAT SIZING | RIDING HAT SIZING |
SMALL | 00 1/2 - 1 | 6 3/8 - 6 3/4 |
MEDIUM | 1 - 2 1/2 | 6 3/4 - 7 1/8 |
LARGE | 2 1/2 - 4 | 7 1/8 - 7 1/2 |
The first jockey skull to incorporate the Multi-Direction Impact Protection System (MIPS), the Charles Owen MS1 Pro Round Skull is also certified to three international equestrian standards to ensure riders feel protected whether on the roads or galloping the fields. This hat features a rounder fit than the Charles Owen MS1 Pro Skull. Highly ventilated and also featuring a padded harness this great hat for every day as well as competition.
MIPS is a technology which allows a helmet to slide relative to the head, mimicking the scalp, it was developed by the Royal Institute of Technology in Stockholm, Sweden and has been used in cycling helmets for many years. This hat features a low friction layer inside which allows the outer hat to slide 10-15mm in all directions. This layer helps to reduce the tangential forces transmitted to the brain during impact potentially decreasing the risk of severe brain injury.
Charles Owen has added MIPS to 'top-up' protection rather than replace coverage already held by the helmet safety standards.
For more information on technology check out Charles Owen's page \"News From Roy's Lab: MIPS\" and MIPS Protection which has more detail about the MIPS system especially in relation to cycling helmets where the technology was first brought to the market.
We endeavour to post out your goods the same day they are ordered; however, in busy periods this can take a little longer.
UK Orders
International Orders
Please see our Terms and Conditions for our full delivery policy.
Returns Policy
The following is a quick guide to our returns policy:
Please see our Terms and Conditions for full details of our returns policy.
Houghton Country is fully PCI Compliant. We work with SagePay, Paypal and Amazon to process your orders.
All debit/credit card payments are collected and processed by SagePay, the largest independent online Payment Service Provider in the country. You can also pay using your Paypal or Amazon accounts.
We never store card details.
We never pass on your personal details to anybody, except to enable your delivery to be made by one of our delivery partners.
Please ensure you read our Privacy Policy before browsing/purchasing from our site.
Free UK Standard Delivery
On all orders over £74
Fast International Delivery
100% Secure Shopping
No Hassle Returns
Stock Alert
Please alert me via email when this product is back in stock.